Adapterkabel TYP 10 für Kennzeichenbeleuchtung, div. KAWASAKI

Adapterkabel TYP 10 für Kennzeichenbeleuchtung, div. KAWASAKI

5,95 

HIGHSIDER Adapterkabel TYP 10 für die Kennzeichenbeleuchtung von div. KAWASAKI Modellen

Artikelnummer: 396-083 Kategorien: ,

Availability will be checked
Please wait a short moment

Beschreibung

HIGHSIDER Adapterkabel TYP 10 für Kennzeichenbeleuchtung

So geht der Heckumbau noch leichter von der Hand – verbinde die neue Kennzeichenbeleuchtung ohne löten oder crimpen problemlos, fest und jederzeit wieder rückrüstbar mit Ihrem Originalkabelbaum.

Kabellänge: 150 mm

Anschlüsse:
Kennzeichenleuchte (+) = rotes Kabel
Masse (-) = schwarzes Kabel

Lieferumfang: 1 Stück

Details

Breite

13.50

Fahrzeugmarke

KAWASAKI

Höhe

11.60

Länge

160.00

Produktmarke

HIGHSIDER

Tiefe

29.70

Passende Fahrzeuge für Produkt 396-083

Hersteller Modell Fahrgestellnummer Baujahr von Baujahr bis
Kawasaki KLE 650 Versys (A2), 35 KW LE650JA2 2022 2022 Mehr Teile anzeigen
Kawasaki KLE 650 Versys (A2), 35 KW LE650JA2 2023 2023 Mehr Teile anzeigen
Kawasaki KLE 650 Versys, 51 KW LE650J 2022 2022 Mehr Teile anzeigen
Kawasaki KLE 650 Versys, 51 KW LE650J 2023 2023 Mehr Teile anzeigen
Kawasaki Ninja 650 (A2), 35 KW EX650SA2 2023 2023 Mehr Teile anzeigen
Kawasaki Ninja 650, 50.2 KW EX650S 2023 2023 Mehr Teile anzeigen
Kawasaki Z 400, 33 KW ER400F 2022 2022 Mehr Teile anzeigen
Kawasaki Z 400, 33 KW ER400F 2023 2023 Mehr Teile anzeigen
Kawasaki Z 650 (A2), 35 KW ER650KA2 2023 2023 Mehr Teile anzeigen
Kawasaki Z 650 RS (A2), 35 KW ER650RA2 2023 2023 Mehr Teile anzeigen
Kawasaki Z 650 RS, 50 KW ER650R 2023 2023 Mehr Teile anzeigen
Kawasaki Z 650, 50 KW ER650K/S 2023 2023 Mehr Teile anzeigen

The power indicated by them is less than that of the new indicator.
This could lead to problems when connecting to your vehicle.
If you have the option to replace the turn signal relay, we recommend that you use one of our load-independent turn signal relays.
If you are stuck, then we would be happy to hear from you.

ORDER THE MATCHING RESISTOR DIRECTLY WITH IT!

Why?
It is possible that when you install your new turn signal, the flashing frequency no longer fits or an error code appears in the cockpit.

Solution:
1. Enter here the original flasher power (in watts). You will then receive a suggestion for a suitable* resistor that fixes the described problem.
2. or use one of our load-independent flasher relays.

Performance of the new turn signal Watt
Performance of their original turn signal Watt

* This is a calculated suggestion. In individual cases, there may be minor deviations.

X