Solar panel charger 80 W TM523-8

Solar panel charger 80 W TM523-8

374,95 

OPTIMATE Solar Panel Charger 80 Watt TM523-8

Availability: In stock SKU: 398-168 Category:

Availability will be checked
Please wait a short moment

Description

The world’s most efficient solar pulse charging system that protects your dead battery and provides safe long-term maintenance.

Charge:
Saves deeply discharged batteries at 1 volt with the unique pulse function. Fastest charging takes place because the intelligent charging function selects impulse or continuous charging depending on the intensity of solar radiation. Intelligent maintenance will continue the next day if a battery has held charge overnight, otherwise the program will revert to the OPTIMIZE step.

MONITORING:
The battery status will be displayed every 3 seconds. Ready indicator for standard and high performance AGM batteries. Draws less than 0.5 mA in monitoring mode. Automatically changes to CHARGE when sun intensity is sufficient.

MONTAGE:
The OptiMate charge control is separate from the panel and can be placed close to the vehicle or battery for easy tracking of charging and maintenance progress. The solar panel must be mounted and aligned so that the sunlight can enter directly. The range / distance between the battery and the panel is 315 cm / 124 inches. Use the OptiMate O-03, O-13, or O-23 extension cables to extend it and connect it to the solar panel and the OptiMate charge controller.

Outer dimensions, including corner brackets:
Width = 68.5 cm / 27 inches
Height = 78.1 cm / 30 3/4 inches
Depth = 3.3 cm / 1 1/4 inch

Solar panel:
POWER: 80 Watts (max.)
VOLTAGE: 12 V nominal, 22 V maximum.
USE: Exterior/Interior.
EXECUTION: Weatherproof aluminum frame with 4 mounting brackets, 200 cm output cable with SAE connector.

OptiMate charge/monitor controller:
CHARGE CURRENT: 6.67A from 80W panel (max average current), 3-5A pulsed current.
USE: Indoor/outdoor (lowest temperature: -20°C).
SAVING MODE: Start with low 1 V voltage
READY FOR: Standard, AGM and GEL 12 V batteries with 2 240 Ah.
INPUT: 15 22 V

EXECUTION:
Weatherproof charge controller housing with mounting holes and loops (for Velcro or Ziptie). SAE input connector for solar panel and 100 cm output cable connected to the battery using the supplied weatherproof battery cable and standard battery terminal set.

SAURE:
No risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long-term battery maintenance. Automatic switch-off in case of short circuit or disconnected battery.

Additional information

Nominal diameter
New in month

In the catalogue

Product brand

OPTIMATE

No matching bikes found

The power indicated by them is less than that of the new indicator.
This could lead to problems when connecting to your vehicle.
If you have the option to replace the turn signal relay, we recommend that you use one of our load-independent turn signal relays.
If you are stuck, then we would be happy to hear from you.

ORDER THE MATCHING RESISTOR DIRECTLY WITH IT!

Why?
It is possible that when you install your new turn signal, the flashing frequency no longer fits or an error code appears in the cockpit.

Solution:
1. Enter here the original flasher power (in watts). You will then receive a suggestion for a suitable* resistor that fixes the described problem.
2. or use one of our load-independent flasher relays.

Performance of the new turn signal Watt
Performance of their original turn signal Watt

* This is a calculated suggestion. In individual cases, there may be minor deviations.

X