Electronics box version H

Electronics box version H

158,95 

Axel Joost electronic box version H, this is the z.Currently the smallest electronic box for mini pushbuttons on the market. It controls the most important electrical functions on the motorcycle from a central location.

Availability: In stock SKU: 361-923 Categories: ,

Availability will be checked
Please wait a short moment

Description

Axel Joost electronics box version H

Size matters! This is the z.Currently the smallest electronic box for mini pushbuttons on the market. It controls the most important electrical functions on the motorcycle from a central location. The following function are supported by the electronics box and can be e. g.T. at any time easily reprogrammed by the user:

– Control of the horn and starter relay via pushbutton
– Integrated flasher relay, controllable via pushbutton or switch
– Control of high and low beam via pushbutton, or switch possible
– Warning indicator function

– 6 status – LED’s for the display of the output states
– Comfort flasher function, Automatic turn signal shutoff
– Position light function selectable via the turn signals (marker light, low light)

Modern microcontroller technology makes it possible that only thin control cables are pulled from the handlebar to the box. Of course, the flashing speed does not change with LED lights. When the comfort turn signal function is activated, the turn signal automatically switches off again after 20 x or 40 x if it is not switched off manually beforehand. When using flashing buttons, a warning flashing function can be activated by simultaneously pressing the flashing buttons alternately (e.g. press left and hold, press right and hold, release left). Pressing a button switches the hazard warning lights off again. A short warning flashing function (2x) can be activated when the ignition is switched on. During the start-up process, the complete light is switched off, of course.

Dimensions: 40 mm length x 12.5 mm width x 25 mm height
Current consumption: Maximum 7mA at 12V
Housing: Black impact-resistant ABS plastic, waterproof encapsulated
Input voltage: 7 – 16 volts
Connections: Control section 0.14 mm², power section 0.75 mm², supply cable 1.5 qmm, 15 cm each
Maximum output current: 5 amps f. High/low beam, 3 amps the other outputs
Maximum ambient temperature: 100 degrees Celsius
Allowable current from 12V connection: 20 amps

Scope of delivery: 1 piece

Tip:
Here you can find a short video on how to adjust the box: https://youtu.be/P8NdlLaev_Q

Additional information

Execution

turn signal

Nominal diameter
Vehicle brand

UNIVERSAL

New in month

In the catalogue

Product brand

Axel Joost

Volt
No matching bikes found

The power indicated by them is less than that of the new indicator.
This could lead to problems when connecting to your vehicle.
If you have the option to replace the turn signal relay, we recommend that you use one of our load-independent turn signal relays.
If you are stuck, then we would be happy to hear from you.

ORDER THE MATCHING RESISTOR DIRECTLY WITH IT!

Why?
It is possible that when you install your new turn signal, the flashing frequency no longer fits or an error code appears in the cockpit.

Solution:
1. Enter here the original flasher power (in watts). You will then receive a suggestion for a suitable* resistor that fixes the described problem.
2. or use one of our load-independent flasher relays.

Performance of the new turn signal Watt
Performance of their original turn signal Watt

* This is a calculated suggestion. In individual cases, there may be minor deviations.

X