Heated grips HG-17, 7/8 inch

Heated grips HG-17, 7/8 inch

147,95 

Heated grips for 7/8 inch (22.2 mm) handlebars with integrated switch, L= 120 or 130mm, open end, black

SKU: 315-664.v Category:

Availability will be checked
Please wait a short moment

Clear

Description

HG-17 heated grips for 7/8 inch (22.2 mm) handlebars with integrated switch

The HG17 heated grips can be fitted to all standard motorcycles and are designed with an integrated adjustable thumb switch. The integrated thumb switch allows the rider to safely adjust the temperature of the grips without having to take their hands off the handlebars.

The different temperature levels of the handles always give the rider the optimum heat. The LED display with 5 different colored LEDs rounds off the modern appearance of the handles and allows the driver to quickly determine which temperature level is set.

Another special feature of the HG17 heated grips is the “low-voltage battery” protection. The system recognizes when the battery voltage is too low and then automatically switches off the heated handles. This ensures that the battery still has sufficient voltage to start and operate the engine.

Features:
– Protective device that automatically switches off the handles if the motorcycle battery voltage is too low.
– Wide range of temperature settings ensure optimum heat at all times.
– Colored LED display that allows the driver to always see directly which temperature level the handles are in.
– With removable handlebar end caps: enables the additional installation of handlebar end weights or handlebar end indicators
– Max. temperature up to 100 degrees
– With ECE test mark: E24*10R06/02*4752*00

Scope of delivery: 1 pair

Additional information

Colour

black

Length

120.00

Material

rubber

Execution

open end

Nominal diameter

22.200000

Product brand

KOSO

No matching bikes found

The power indicated by them is less than that of the new indicator.
This could lead to problems when connecting to your vehicle.
If you have the option to replace the turn signal relay, we recommend that you use one of our load-independent turn signal relays.
If you are stuck, then we would be happy to hear from you.

ORDER THE MATCHING RESISTOR DIRECTLY WITH IT!

Why?
It is possible that when you install your new turn signal, the flashing frequency no longer fits or an error code appears in the cockpit.

Solution:
1. Enter here the original flasher power (in watts). You will then receive a suggestion for a suitable* resistor that fixes the described problem.
2. or use one of our load-independent flasher relays.

Performance of the new turn signal Watt
Performance of their original turn signal Watt

* This is a calculated suggestion. In individual cases, there may be minor deviations.

X