1 inch handlebar with oblong hole

1 inch handlebar with oblong hole

69,97 

-30%

1 inch handlebar Clubman AS1.4LL. The right inch handlebar for sporty driving, available in various colours

SKU: 162AS014 Categories: ,

Availability will be checked
Please wait a short moment

Clear

Description

1 inch steel handlebar with slotted hole for cable routing

As the only handlebar manufacturer in Europe, LSL has been supplementing this inch handlebar range for some time now with light but high-strengthAluminium handlebars also with sporty handlebar shapes. These handlebars are manufactured in such a way that the wall thickness (outside 4mm) becomes stronger towards the clamping area. The handlebars reachthereby a stiffness, which is equal to conventional steel handlebars.

Available in different colours.

For many models you will find specific clamping blocks in the bikeDatabase.

The following articles fit to this product:
Weights (18mm) / Grips / Mirrors / Drilling template

Maintenance instructions:
– For all handlebars and their surface variants only acid- and lye free cleaner! br/> – Never use in direct sunlight and do not allow the cleaner to dry up! br/> – Contact with brake fluid, brake cleaner, oil, fuel,Do not use polishing pastes with abrasive particles etc., absorb dripping quantities immediately with a soft cloth.
– Before using cleaning agents, check compatibility at aTest inconspicuous area
– No guarantee or warranty if not properly cleaned and cared for.

Additional information

Colour

gold, gold, gold_en, silber matt, silver matt

Thickness

4.0000

Height

50.00

Width

700.00

Identifier

AS1

Material

Aluminium

Expert report

ABE

Execution

1 Zoll

Product brand

CLUBMAN

Vehicle brand

UNIVERSAL

Inside diameter

18.00

Outer diameter

25.40

The power indicated by them is less than that of the new indicator.
This could lead to problems when connecting to your vehicle.
If you have the option to replace the turn signal relay, we recommend that you use one of our load-independent turn signal relays.
If you are stuck, then we would be happy to hear from you.

ORDER THE MATCHING RESISTOR DIRECTLY WITH IT!

Why?
It is possible that when you install your new turn signal, the flashing frequency no longer fits or an error code appears in the cockpit.

Solution:
1. Enter here the original flasher power (in watts). You will then receive a suggestion for a suitable* resistor that fixes the described problem.
2. or use one of our load-independent flasher relays.

Performance of the new turn signal Watt
Performance of their original turn signal Watt

* This is a calculated suggestion. In individual cases, there may be minor deviations.

X