Sport-Match steering tube set 1 inch (25,4 mm)

Sport-Match steering tube set 1 inch (25,4 mm)

79,95 

Steering tube set 1 inch (25,4 mm), Sport-Match, fit easily in 22,2mm clamps, available in different colours

SKU: 154-L02 Category:

Availability will be checked
Please wait a short moment

Clear

Description

Steering tube pair inch

The LSL-Sport Match and Offset High clamps are practically indestructible. This is not only extremely good for racing, because after a crash only the steering tubemust be replaced. For this case the steering tubes are also available separately. The inch steering tubes are turned off in the clamping area and fit without any problems in 22,2mm clamps.

FollowingProducts fit to this article: Handlebar weights:
Holder for hydraulic reservoir / grips / handlebar end pieces / mirrors

Care instructions:
– For all handlebars and theirSurface variants only use acid and alkali-free cleaners! br/> – Never use in direct sunlight and do not allow the cleaner to dry up! br/> – Contact with brake fluid,Do not use brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., absorb dripping quantities immediately with a soft cloth.
– Before using cleaning agents, theTest compatibility in an inconspicuous place!
– No guarantee or warranty if not properly cleaned and cared for.

Additional information

Thickness
Colour

black, silver

Material
Expert report
Execution

steering tube

Nominal diameter
Product brand

LSL

Vehicle brand

UNIVERSAL

Inside diameter

18.00

Outer diameter
No matching bikes found

The power indicated by them is less than that of the new indicator.
This could lead to problems when connecting to your vehicle.
If you have the option to replace the turn signal relay, we recommend that you use one of our load-independent turn signal relays.
If you are stuck, then we would be happy to hear from you.

ORDER THE MATCHING RESISTOR DIRECTLY WITH IT!

Why?
It is possible that when you install your new turn signal, the flashing frequency no longer fits or an error code appears in the cockpit.

Solution:
1. Enter here the original flasher power (in watts). You will then receive a suggestion for a suitable* resistor that fixes the described problem.
2. or use one of our load-independent flasher relays.

Performance of the new turn signal Watt
Performance of their original turn signal Watt

* This is a calculated suggestion. In individual cases, there may be minor deviations.

X